Product Center
Product name:
B-CW-1000 water based screen cleaning machine
number:
1. Features of water-based stencil cleaning machine：
?
? ? ?1. Fast ?super cleaning effect: The cleaning of SMT steel mesh, copper mesh, and rubber mesh can quickly and effectively clean the residual solder paste, red glue and other contaminants on the surface and hole walls after printing;
? ? ?2 、Standard water-based automatic cleaning mode: ?Complete the cleaning, rinsing, and drying processes in one cleaning room, with small size and compact structure;
? ? ?3、Whole process visualization: ?The cleaning room is equipped with a visual window, and the cleaning process is clear at a glance;
? ? ?4 、Wide range of applications: SMT/ SOP steel mesh, silk screen, glue printing jig, SMT scraper, large size PCBA / misprinted board;
? ? ?5 、DI water real-time resistivity cleanliness monitoring system: ?Used to monitor the cleaning effect, the resistivity can be set, the resistivity control range is 0~18MΩ；
? ? ?6、Adjustable nozzle pressure and symmetrical design: ? Solve the tension problem of SMT/SOP steel mesh under high pressure spray conditions during the cleaning process;
? ? ?7、Standard cleaning liquid tank heating system: The water-based process requires heating and emulsification, which greatly improves the cleaning efficiency and shortens the cleaning time;
? ? ?8、Low operating cost\Built-in filtering device can realize the recycling of solvents, using compressed air to recover the residual chemical liquid in the pipeline and pump, which can effectively save 50% of the cleaning agent;
? ? 9、Washable oversized PCBA（800mm*800mm)
? 10、High pressure fan + air knife cutting air drying: 5HP high pressure fan is used, which is more efficient (3~5 minutes) and more thorough!
? 11、Full Chinese large touch screen operation interface:: ?Using a stable and reliable imported brand color touch screen, aiming at: solvent temperature, cleaning time, rinse times/time,
? ? ? ? ?漂Washing temperature, drying time, drying temperature, conductivity monitoring parameters, etc..., set;
?
?
2. Parameters of water-based stencil cleaning machine：
?
? ? ?1. Applicable screen size: up to 800mm(L) ×750mm(W) × 40mm(H) special size needs to be customized
? ? ? 2、Liquid tank capacity： ? 50L* 2PCS
? ? ? 3、Cleaning method: moving up and down high pressure spray
? ? ? 4、Rinsing method: open-loop DI water or closed-loop chemical liquid spray
? ? ? 5、Drying method: high pressure hot air cutting water (optional super model)
? ? ? 6、Cleaning time: 2-5 minutes
? ? ? 7、Cleaning and isolation time: 1 minute
? ? ? 8、Rinsing time: 2-5 minutes
? ? ?9、Rinsing and drying time: 3-5 minutes
? ? 10、Resistivity tester range：0--18MΩ
? ? 11、Liquid heating temperature: room temperature～60℃
? ? 12、Liquid tank heater power（KW）：9KW
? ? 13、Rinse tank heater power(KW)： 9KW
? ? 14、Noise: less than 50 decibels
? ? 15、Drying temperature: room temperature--90℃
? ? 16、Drying heater power（KW）：6KW
? ? 17、Total power：33KW
一、水基網板清洗機特點：
?
? ? ?1、迅速&超強清潔效果: SMT鋼網、銅網、膠網的清洗，能迅速有效清洗印刷后表面以及孔壁殘留的錫膏、紅膠等污染物；
? ? ?2 、標準水基全自動清洗模式: ?在一個清洗室內完成清洗、漂洗、烘干全部清洗工序，體積小，結構緊湊；
? ? ?3、全流程可視化: ?清洗室裝有可視化窗口,清洗過程一目了然；
? ? ?4 、應用廣泛: SMT/ SOP鋼網、絲網、印膠治具、SMT刮刀、大尺寸PCBA / 誤印板；
? ? ?5 、DI水實時的電阻率清潔度監控系統: ?用于監測清洗效果，電阻率可設定，電阻率控制范圍0~18MΩ；
? ? ?6、噴嘴壓力可調以及對稱式設計: ? 解決了SMT/ SOP鋼網在清洗過程中受高壓力噴淋條件下的張力問題；
? ? ?7、標配的清洗液槽加熱系統: 水基工藝對加溫乳化的需求， 大大提升了清洗效率，縮短清洗時間；
? ? ?8、低運行成本\內置過濾裝置可實現溶劑的循環使用，采用壓縮空氣回收管道及泵內的殘留化學液，能有效節省50%清洗劑；
? ? 9、可清洗超大尺寸PCBA（800mm*800mm)
? 10、高壓風機+風刀切風干燥：采用5HP高壓風機,效率更高（3~5分鐘）、更徹底！
? 11、全中文超大觸摸屏操作界面: ?采用穩定可靠的進口品牌彩色觸摸屏,針對:溶劑溫度、清洗時間、漂洗次數/時間、
? ? ? ? ?漂洗溫度、烘干時間、烘干溫度、電導率監控參數等……，設定；
?
?
二、水基網板清洗機參數：
?
? ? ?1、適用網板尺寸：最大800mm(L) ×750mm(W) × 40mm(H) 特殊尺寸需訂制
? ? ? 2、液體槽容量： ? 50L* 2PCS
? ? ? 3、清洗方式： 上下移動式高壓噴淋
? ? ? 4、漂洗方式： 開環DI水或閉環化學液噴淋
? ? ? 5、干燥方式： 高壓熱風切水（可選超強機型）
? ? ? 6、清洗時間：2-5分鐘
? ? ? 7、清洗隔離時間 ：1分鐘
? ? ? 8、漂洗時間：2-5分鐘
? ? ?9、漂洗干燥時間：3-5分鐘
? ? 10、電阻率測試儀范圍：0--18MΩ
? ? 11、液體加熱溫度：室溫～60℃
? ? 12、液體槽加熱器功率（KW）：9KW
? ? 13、漂洗槽加熱器功率(KW)： 9KW
? ? 14、噪音：小于50分貝
? ? 15、烘干溫度： 室溫--90℃
? ? 16、烘干加熱器功率（KW）：6KW
? ? 17、總功率約：33KW
Website construction: netlink technology - Shenzhen
Shenzhen ZKSMC Technology Co., Ltd.
Tel：+86-0755-23461395
Phone：13560775327
Fax：+86-0755-29191826
Address：Building 1, Yulu Fifth Industrial Zone, Yutang Street, Guangming New District, Shenzhen
? Copyright 2020 Shenzhen ZKSMC Technology Co., Ltd. 粵ICP備2021066739號